| |
— | orangepi [2019/08/13 10:16] (Version actuelle) – créée - modification externe 127.0.0.1 |
---|
| ====== Test sur OrangePI ====== |
| J'ai acquis une orange pi zero sur aliexpresse, voici quelques tests. |
| |
| ===== Spécifications techniques ===== |
| C'est déjà tout détaillé sur le web !\\ |
| Sinon les principales spéf:\\ |
| {{::orangepizero_info.jpg?600|}} |
| |
| |Hardware specification|| |
| |CPU|H2 Quad-core Cortex-A7 H.265/HEVC 1080P.| |
| |GPU|·Mali400MP2 GPU @600MHz, ·Supports OpenGL ES 2.0| |
| |Memory (SDRAM)|256MB/512MB DDR3 SDRAM(Share with GPU)(256MB version is Standard version)| |
| |Onboard Storage|TF card (Max. 32GB)/ Spi Flash| |
| |Onboard Network|10/100M Ethernet RJ45 POE is default off.| |
| |Onboard WIFI|XR819, IEEE 802.11 b/g/n| |
| |Audio Input|MIC| |
| |Video Outputs|Supports external board via 13pins| |
| |Power Source|USB OTG can supply power| |
| |USB 2.0 Ports|Only One USB 2.0 HOST, one USB 2.0 OTG| |
| |Buttons|Power Button| |
| |Low-level peripherals|26 Pins Header, compatible with Raspberry Pi B+, 13 Pins Header, with 2x USB, IR pin, AUDIO(MIC, AV)| |
| |LED|Power led & Status led| |
| |Supported OS|Android, Lubuntu, Debian, Raspbian| |
| |
| |Interface definition|| |
| |Product size|48 mm × 46mm| |
| |Weight|26g| |
| |
| ===== Soft OS ===== |
| On pourra trouver les OS spécifiques pour l'Orange PI ici :\\ |
| [[http://www.orangepi.org/downloadresources/]] |
| |
| Une fois la carte SD prête, voici une doc pour afficher sur une console le démarrage :\\ |
| [[https://www.sigmdel.ca/michel/ha/opi/OPiZ_uart_en.html§]] \\ |
| **ATTENTION : Utiliser une convertisseur TTLS en 3V !**\\ |
| J'ai grillé le port avec du 5V.... |
| |
| ===== DOMOTICZ ===== |
| Pour installer domoticz, je suivi ce lien :\\ |
| [[https://www.sigmdel.ca/michel/ha/opi/domopiz_01_fr.html]] |
| |
| Vous trouverez plein de doc pour configurer l'OrangePI.\\ |
| Pour installer domotcz : \\ |
| sudo curl -L install.domoticz.com | bash |
| |
| |
| ===== Problèmes rencontrés ! ===== |
| J'ai grillé la connexion série avec du 5v au lieu de 3V !\\ |
| Ma version de linux ne prend pas en compte mon interface RFlink qui utilise une arduino chinois avec un chipset ch341.\\ |
| Utiliser une nouvelle distrib est compliqué avec le port série grillé...\\ |
| |